舰船电力系统运行负荷估算方法研究

针对舰船电力系统的运行负荷估算常见算法的不足,提出了改进算法.改进算法用随机模型和回归模型描述舰船电力负荷,用回归模型描述的负荷采用回归算法,用随机模型描述的负荷采用逐步聚类法进行计算,并对获得随机负荷的计算参数提出了具体方法.通过对某船的计算和实测,进行了各算法的比较,验证了改进算法的可信性.     

Dynamic parameters of multi-cabin protective structure subjected to low-impact load – Numerical and experimental investigations

The dynamic response of a multi-cabin protective structure subjected to impact load directly affects the protective performance of materials; thus, studying the dynamic response and communication law of wave effect of the load plays an important role in the prediction of protective performance. In this study, the protection experiments of box-structure under air- and/or water-medium are conducted, the dynamic response of the structure subjected to low-impact load is analyzed, and the corresponding numerical simulations are analyzed using the theory of finite element method (FEM). Combined with experimental and FEM simulations, the shock strain distribution, acceleration attenuation, and signal energy in defensive materials are determined. Based on the results, the metal structure exhibits good absorption characteristics for shock vibration. Using the experimental data, we also show that the attenuation of shock wave in water medium should be significantly better than that in air medium, and the protective structure should be designed for a combination of water and air mediums. Meanwhile, the numerical simulation can provide a quantitative analysis process for dynamic analysis of defensive materials.     

基于遗传模拟退火算法的OFDMA系统资源分配

针对多用户OFDMA系统,提出了一种基于遗传模拟退火算法的多用户OFDMA系统资源分配策略。在资源分配时,首先假设总功率在载波间均等分配,随后根据比例速率要求确定每个用户需要的子带数,最后引入遗传模拟退火算法求解联合优化中的子带分配,在保证用户间公平性的前提下最大化系统吞吐量。仿真结果表明,该策略系统容量较大,并且近似满足了不同用户间传输速率比例性要求。     

Planning gamma accelerated degradation tests with two accelerating variables

Gamma accelerated degradation tests (ADT) are widely used to assess timely lifetime information of highly reliable products with degradation paths that follow a gamma process. In the existing literature, there is interest in addressing the problem of deciding how to conduct an efficient, ADT that includes determinations of higher stress‐testing levels and their corresponding sample‐size allocations. The existing results mainly focused on the case of a single accelerating variable. However, this may not be practical when the quality characteristics of the product have slow degradation rates. To overcome this difficulty, we propose an analytical approach to address this decision‐making problem using the case of two accelerating variables. Specifically, based on the criterion of minimizing the asymptotic variance of the estimated q quantile of lifetime distribution of the product, we analytically show that the optimal stress levels and sample‐size allocations can be simultaneously obtained via a general equivalence theorem. In addition, we use a practical example to illustrate the proposed procedure.     

两跳OFDM译码转发中继系统的功率分配研究

分析了系统总功率约束和各节点独立功率约束条件下的中继信道,提出了以最大化系统容量为准则的两跳中继系统联合子载波配对和功率优化分配算法。算法先进行子载波配对,然后选出一组信道增益最大的子载波进行平均功率分配,最后通过迭代得到功率分配结果。为了进一步降低系统复杂度,我们利用相邻子载波之间的相关性,用若干相邻子载波组成一个等效子信道。仿真结果表明,所提算法可以在大大降低反馈量的情况下达到和注水功率分配几乎相同的系统容量。     

基于理想解法的空中加油机驻地分配选择

一体化联合作战条件下,跨战区、跨军兵种实施空中加油将更加频繁,空中加油机驻地分配选择对空中加油任务的实施有重要影响。分析了影响空中加油机驻地分配选择的主要因素,以此确定决策指标,这是一个多指标综合评价问题。基于理想解法的原理和方法,构建了空中加油机驻地分配选择决策的数学模型。通过示例分析表明,该方法计算简单,较好地解决了空中加油机驻地分配选择问题,并可在此基础上做进一步研究,为实际应用中解决类似问题提供了一种新思路。     

激光制备高附着性能的铜基类金刚石膜

提升类金刚石(Diamond-Like Carbon, DLC)膜在被保护基底上的附着能力具有明显的实际应用价值。从微观机理上分析了前期设计的Cu基多层DLC膜有效性的原因。在此基础上,研究了DLC/SiC循环层中两者厚度比例对膜层的附着性能、纳米硬度和耐磨性的影响,以优化结构、进一步提升实际应用所需的膜层性能。纳米划痕和压痕测试结果表明:随着DLC层与SiC层厚度比例的增大,多层DLC膜在Cu基上附着性能逐渐降低,但当厚度比小于2.3时,仍接近厚度400 nm的单层DLC膜在Si基上的附着性能；Cu基多层DLC膜的纳米硬度逐渐提高,同时,耐磨性接近纯DLC膜。     

人员交通类场所人员荷载研究

对人员交通类场所的特点进行了分析，将人员交通类场所归纳为简单通道、复杂通道、候机（车）厅、进出港厅等组件。针对简单通道和进出港厅，采用“人员流量法”和“人员密度法”两种方法计算人员荷载；针对复杂通道，采用空间上分解为流线、时间上分解为阶段的方法计算人员荷载；针对候机（车）厅，按照设计容量确定人员荷载。并给出了一个包括国家铁路、地铁的综合交通枢纽换乘层人员荷载计算的典型案例。     

多操纵面战斗机动态控制分配策略研究(英文)

现代先进飞机配置多个操纵面且又冗余,这有利于实现非常规飞行,提高飞机敏捷性,使飞机在机动和故障时有更多的选择,但是同时也导致了飞机控制设计复杂度的增加.为了达到更好的效果,就必须利用控制分配器来充分利用多操纵面的不同带宽.从频率域角度出发,研究了动态控制分配方法,并将其应用于某型先进战斗机的控制分配器设计中,利用鸭翼的频率特性抵消府舱过载,经仿真验证,采用动态控制分配策略时,可以有效地减小座舱过载,同时还可以减小配平阻力,取得了良好的控制效果.     

Responses of HFR-LWC beams under close-range blast loadings accompanying membrane action

The load-carrying capacities and failure patterns of reinforced concrete components can be significantly changed by membrane effects. However, limited work has been carried out to investigate the blast resistance of Hybrid Fiber Reinforced Lightweight Aggregate Concrete (HFR-LWC) members accompanying membrane action. This paper presents a theoretical approach to quantitatively depicting the membrane behavior and its contribution on the behavior of HFR-LWC beams under close-range blast loadings, and the suitability of the proposed model is validated by a series of field tests. An improved Single-Degree-of-Freedom (SDOF) model was employed to describe the dynamic responses of beam-like members under blast loadings accompanying membrane action, where the mass-load coefficient is determined according to the nonuniformly distributed load induced by close-range explosion, and the membrane action is characterized by an in-plane (longitudinal) force and a resisting moment. The elasto-plastic and recovery responses of HFR-LWC beams under the combined action of blast load and membrane force were analyzed by the promoted model. A specially built end-constrain clamp was developed to provide membrane action for the beam member when they are subjected to blast load simultaneously. It is demonstrated that the analytical displacement-time histories are in good agreement with experimental results before peak deflections and that the improved SDOF model is an acceptable tool for predicting the behavior of HFR-LWC beams under blast loadings accompanying membrane action.